Cartridge Razor on a Wet Surface

We all love the look and feel of a fresh new razor.

The way it shines, the way it glides across our skin and removes our facial hair, and even the feel we get by simply holding it.

All of this wears off after a while due to heavy use.

You don’t even have to use it too much, as the razor will start to deteriorate on its own.

That is unless we take proper care of it and clean it regularly.

Yes, my friends, there is a way of preserving your razor for a while longer.

You only have to know how to clean a razor properly and take care of it.

We have the solution and the correct method right here.

When Is It Time to Clean Your Razor

Unless you use straight razors, your regular one will start to deteriorate after a while. A perfect razor is made out of solid metal and, as such, can last a lifetime. That is if you take care of it properly.

As you shave regularly, your razor will attract soap, dead skin cells, grease, pre-shave oils and even blood, causing heavy build-up that will affect its quality.

The thin film of the blade, no matter if it’s chrome or nickel plated, will start to lose its shine and get dull due to the influence of all the debris sticking within it.

Also, not drying the blades properly can lead to deterioration of the metal and even corrosion. Therefore, you must be aware that if you want to preserve it long-term, you must clean your blades.

It is best to do it every time you finish shaving, but you can also save it once you notice a heavy debris build-up.

Things You Need

Whether you are cleaning your electric razor or blade, the things you will need are relatively similar. You will need some things that you will probably be able to find around the house. So don’t worry about needing to get some expensive gear.

Depending on your method and the amount of debris you remove, you will need a lot of hot water, some rubbing alcohol for disinfection, and perhaps some toothpaste.

Of course, we don’t think that you should waste your time cleaning disposable razors for men as they are already meant to be disposed of after one or two uses, so you are not going to be able to extend their use for much longer and might only end up with beard burn instead.

Cleaning an Electric Razor With a Small Brush

How to Clean an Electric Razor

Cleaning an electric razor may be easier and sometimes even unnecessary, depending on your type. Quality electric razors come with a cleaning and sanitation station, which dries out the razor automatically after use.

You must get down and dirty if you are unlucky to have that type of razor.

Step 1 – Remove the hairs

If you are dry shaving, you will need to flip open the rotary blades of an electric razor. Use a small brush to remove all the hairs that get trapped inside. However, if you use shaving gel or cream to shave, open it up similarly and rinse it off.

Step 2 – Add some liquid soap to the blades

Get the blades wet and then add some dish detergent or soap.

Step 3 – Run the razor

Turn the razor on for about 15 seconds until it creates suds.

Step 4 – Rinse all of it off

Put the blades under some warm water to rinse the soap off. Also, take the head off and rinse it off as well, especially the foils of the blade.

Step 5 – Dry it out

Leave the razor disassembled and allow it to air dry completely.

How to Clean a Wet Razor

If your idea of shaving involves shaving with a safety razor or a double edge razor, then you will have to take a bit of a different approach when cleaning it out. Clearing it regularly will allow you to add a few extra shaves with it and not dispose of it much earlier.

What you are going to have to do regularly while you shave is rinse it off with every stroke. After you are done, you must disinfect and leave it to dry by storing it properly.

Washing a Razor

If you need to clean it out due to unwanted build-up, you should proceed this way:

Step 1 – Rinse the blades

Turn on some hot water and begin by rinsing the blades as best as possible.

Step 2 – Disinfect the razor

Pour some rubbing alcohol into a basin and leave the head of the razor inside for about a minute. It is best to use 70% alcohol.

Step 3 – Clean the handle

If the handle is gunky and dirty, combine the dishwasher and warm water and soak the entire razor with the handle for about 5 to 10 minutes.

Step 4 – Dry the razor out

Let the razor dry out completely by hanging it in a well-ventilated room. Do not place it in a drawer or a closed space to dry.

Quick Tips and Tricks

To help you get the best out of this cleaning regime and to allow you to avoid the beard itch that a filthy razor can cause, you best read and also follow some tricks that we are about the reveal to you:

  • Check if your electric razor can get wet. Use a dry brush to clean it out instead.
  • Think about blowing the trapped hairs out with a blow dryer or compressed air.
  • Sanitize the blades or foils with a q-tip and some rubbing alcohol.
  • If you want to prolong the lifespan of a razor as much as possible, clean it every time you are done shaving.
  • Get a special razor brush to dislodge all the debris before disinfecting the blades.
  • You can use toothpaste instead of liquid soap to brush the blades thoroughly.
  • If you are dealing with a lot of debris, boil the razor in hot water for about 10 minutes.

Do’s and Don’ts of Razor Maintenance and Care

When handling your razor, you will want to do everything correctly so you don’t cause any damage. Many people resort to inevitable mistakes that can leave your razor inoperable or unusable.

Do’s

  • Hold the razor under the tap after every few strokes while shaving. Shake off any excess water to dry it out each time you rinse it.
  • Store your razor correctly. If it comes in a holder, you can place it in it to dry out. If you don’t, you can leave it on a cloth or a towel that you’ve used during your hot towel shave.

Don’ts

  • Don’t tap your razor cartridge against the sink. The razor parts can get damaged that way, rendering them inoperable.
  • Avoid wiping your razor with a towel. Many people mistake this one as good practice, but instead, it can dull the blade further and cause more damage to it.
  • Bad cleaning habits can disturb the precise geometry of even quality razors, so forgetting to clean your razor will result badly.

FAQ

Does boiling a razor clean it?

Yes, it does. It helps to dissolve the gunk and the debris that has built up over time both on the handle of the razor and the blades as well.

How to clean a razor after someone else uses it?

It is best to avoid sharing a razor with somebody else. It is simply bad hygiene. You should get another razor instead of the one someone else has used.

How to clean a razor handle?

Mix warm water and liquid soap and put the handle on for about 10 minutes. You can also boil the handle in water as well.

How to disinfect a razor without alcohol?

You can use lemon or vinegar to do it. These are natural disinfectants that can help to remove bacteria.

Conclusion

You can help your razor a lot by taking care of it properly. By cleaning it after each use, you can extend the life of your razor. Consequently, you will save time and money on getting new ones.

Also, your beard and the skin on your face will appreciate having a clean razor that is free of bacteria.